Pitot tube

From Wikipedia, the free encyclopedia

A Pitot (IPA pronunciation: [pito]) tube is a measuring instrument used to measure fluid flow velocity, and more specifically, used to determine the airspeed of an aircraft. The Pitot tube is named after its inventor, Italian born French engineer Henri Pitot, and was modified to its modern form by Henry Darcy.

The basic pitot tube simply consists of a tube pointing directly into the fluid flow. As this tube contains air, a pressure can be measured as the moving air is brought to rest. This pressure is the stagnation pressure of the air, also known as the total pressure, or sometimes (particularly in aviation circles) the pitot pressure.

The measured stagnation pressure cannot of itself be used to determine the airspeed. However, since Bernoulli's equation states that

stagnation pressure = static pressure + dynamic pressure

then the dynamic pressure is simply the difference between the static pressure and the stagnation pressure. The static pressure is generally measured using the static ports on the side of the fuselage. The dynamic pressure is then determined using a diaphragm inside an enclosed container. If the air on one side of the diaphragm is at the static pressure, and the other at the stagnation pressure, then the deflection of the diaphragm is proportional to the dynamic pressure, which can then be used to determine the indicated airspeed of the aircraft. The diaphragm arrangement is typically contained within the airspeed indicator, which converts the dynamic pressure to an airspeed reading by means of mechanical levers.

Instead of static ports, a pitot-static tube may be employed, which has a second tube coaxial with the pitot tube with holes on the sides, outside the direct airflow, to measure the static pressure.

Pitot tubes on aircraft commonly have heating elements to prevent the tube from becoming clogged with ice.

[edit] Applications in Mining

In Mining applications the velocities being measured are those flowing in ducts or tubing where measurements by an anemometer would be difficult to obtain. In these kinds of measurements, the most practical instrument to use is the pitot tube. The pitot tube can be inserted through a small hole in the duct with the pitot connected to a U-tube water gauge or some other differential pressure gauge for determining the velocity inside the duct.

The quantity of air flowing through the duct each minute can then be estimated from:

 Volume Flow Rate (cubic feet per minute) = Duct Area (square feet) x Velocity (feet per minute) 

Velocity is typically measured in feet per minute in such applications.

[edit] See also

• Airspeed indicator
• Calibrated airspeed
• Flow measurement
• Mach number
• Piezometer
• Pitot-static system
• Position error
• True airspeed

[edit] References

• Kermode, A.C. [1972] (1996). Mechanics of Flight, Barnard, R.H. (Ed.) and Philpott, D.R. (Ed.), 10th edition, Prentice Hall, 63-67. ISBN 0-582-23740-8.
• Pratt, Jeremy M. [1997] (2005). The Private Pilot's Licence Course: Principles of Flight, Aircraft General Knowledge, Flight Performance and Planning, 3rd edition, gen108-gen111. ISBN 1-874783-23-3.