开放式最短路径优先
维基百科，自由的百科全书
开放式最短路径优先（英文Open Shortest Path First，OSPF）是一种链路状态，分层内部网关协议（IGP）的路由协议。著名的迪杰斯特算法被用来计算最短路径树。它使用“成本”作为路由度量。链路状态数据库用网络拓扑来创建，它在区域中的全部路由器上是等价的。
OSPF is perhaps the most widely used IGP in large networks. It can operate securely, using MD5 to authenticate peers before forming adjacencies, and before accepting link-state advertisements. A natural successor to RIP, it was VLSM capable or classless from its inception. A newer version of OSPF (OSPFv3) now supports IPv6 as well. Multicast extensions to OSPF (MOSPF) have been defined, however these are not widely used. OSPF can "tag" routes, and propagate these tags along with the routes.
An OSPF network can be broken up into smaller networks. A special area called the backbone area forms the core of the network, and other areas are connected to it. Intra-area routing goes via the backbone. All areas must connect to the backbone; if no direct connection is possible, a virtual link may be established.
Routers in the same broadcast domain or at each end of a point to point link form adjacencies when they have discovered each other. The routers elect a designated router (DR) and backup designated router (BDR) which act as hub to reduce traffic between routers. OSPF uses both unicast and multicast to send 'hello packets' and link state updates. Multicast addresses 224.0.0.5 and 224.0.0.6 are used. In contrast to RIP or BGP, OSPF does not use TCP or UDP but uses IP directly, using IP protocol 89.
目录 |
[编辑] Area types
An OSPF network is divided into areas. These are logical groupings of routers whose information may be summarized towards the rest of the network. Several "special" area types are defined:
[编辑] Backbone area
The backbone area (also known as area zero) forms the core of an OSPF network. All other areas are connected to it, and intra-area routing happens via a router connected to the backbone area.
[编辑] Stub area
A stub area is an area which doesn't receive external routes. External routers are defined as routes which were distributed in OSPF via another routing protocol. Therefore, stub areas typically need to rely on a default route to send traffic to routes outside the stub.
[编辑] Not-so-stubby area
Also referred to as NSSA, a not-so-stubby area is a type of stub area that can import AS external routes, but within certain limits
[编辑] OSPF router types
OSPF defines various router types. These are logical definitions, and a router that uses OSPF may be classified as more than one of the following types. For example, a router that is connected to more than one area, and which receives routes from a BGP process connected to another AS, is both an ABR and an ASBR.
[编辑] Area Border Router
An Area Border Router (ABR) is a router that connects one or more OSPF areas to the main backbone network. It is considered a member of all areas it is connected to. An ABR keeps multiple copies of the link-state database in memory, one for each area.
[编辑] Autonomous System Border Router
An ASBR is a router connected to more than one autonomous system (AS), and which exchanges routing information with routers in other ASs. ASBRs typically also run a non-IGP routing protocol, such as BGP. An ASBR is used to distribute routes received from another ASs throughout its own AS.
[编辑] Internal Router
A router is called an Internal Router (IR) if it only has OSPF adjacencies with routers in the same area.
[编辑] Backbone Router
A Backbone Router (BR) is a router with an interface in to the backbone area. An ABR would be a BR, although the reverse need not be true.
[编辑] RFC history
- 1989, October - First put forward as a proposed standard as RFC 1131.
- 1994, The OSPF NSSA Option, RFC 1587.
- 1994, March - Multicast extensions to OSPF proposed as RFC 1584.
- 1998, April - OSPF version 2, updated in RFC 2328, standard 54.
- 1999, December - OSPFv3, IPv6, RFC 2740.
- 2003, January - The OSPF NSSA Option updated, RFC 3101.
[编辑] External links
- IETF OSPF Working Group
- Zebra free router software which supports OSPF
- Quagga a fork of Zebra
