Telerobotics
From Wikipedia, the free encyclopedia
Telerobotics is the area of robotics that is concerned with the control of robots from a distance, chiefly using wireless connections (like Wi-Fi and similar) or the Internet. It is a combination of two major subfields, teleoperation and telepresence.
[edit] Teleoperation
Teleoperation means "doing work at a distance", although by "work" we mean almost anything. What we mean by "distance" is also vague: it can refer to a physical distance, where the operator is separated from the robot by a large distance, but it can also refer to a change in scale, where for an example a surgeon may use micro-manipulator technology to conduct surgery on a microscopic level.
A teleoperator is a device that may be controlled remotely and such a device is not necessarily considered to be a robot. In simple cases the controlling operator's command actions correspond directly to actions in the device controlled, as for example in a radio controlled model aircraft or a tethered deep submergence vehicle. Where communications delays make direct control impractical (such as a remote planetary rover), or it is desired to reduce operator workload (as in a remotely controlled spy or attack aircraft) , the device will not be controlled directly, instead being commanded to follow a specified path. At increasing levels of sophistication the device may operate somewhat independently in matters such as obstacle avoidance, also commonly employed in planetary rovers.
Devices designed to allow the operator to control a robot at a distance is sometimes called telecheric robotics.
Two major components of Telerobotics and Telepresence are the visual and control applications. A remote camera provides a visual representation of the view from the robot. Placing the robotic camera in a perspective that allows intuitive control is a recent technique that although based in Science Fiction (Robert Heinleins WALDO AND MAGIC COMPANY 1959) has not been fruiful as the speed, resolution and bandwidth have only recently been adequate to the task of being able to control the robot camera in a meaningful way. Using a head mounted display, the control of the camera can be facilitated by tracking the head as shown in the figure below.
This only works if the user feels comfortable with the latency of the system, the lag in the response to movements, and the visual representation. Any issues such as, inadequate resolution, latency of the video image, lag in the mechanical and computer processing of the movement and response, and optical distortion due to camera lens and head mounted display lenses, can cause the user 'simulator sickness' which is exacerbated by the lack of vestibular stimulation with visual representation of motion.
Mismatch between the users motions such as registration errors, lag in movement response due to overfiltering, inadequate resolution for small movements, and slow speed can contribute to these problems.
The same technology can control the robot, but then the hand eye coordination issues become even more pervasive through the system, and user tension or frustration can make the system difficult to use.
Ironically the tendency to build robots has been to minimize the degrees of freedom because that reduces the control problems. Recent improvements in computers has shifted the emphasis to more degrees of freedom, allowing robotic devices that seem more intelligent and more human in their motions. This also allows more direct teleoperation as the user can control the robot with their own motions.
[edit] Telepresence
Telepresence means "feeling like you are somewhere else". Some people have a very technical interpretation of this, where they insist that you must have head-mounted displays in order to have telepresence. Other people have a task-specific meaning, where "presence" requires feeling that you are emotionally and socially connected with the remote world. It's all a little vague at this time.
