Raised-cosine filter
From Wikipedia, the free encyclopedia
The raised-cosine filter is a particular electronic filter, frequently appearing in telecommunications systems due to its ability to minimise inter-symbol interference (ISI). It is so called due to the non-zero portion of the frequency spectrum of its simplest form (β = 1) being a cosine function, 'raised' up to sit above the f (horizontal) axis.
Contents |
[edit] Mathematical description
The raised-cosine filter is an implementation of a low-pass Nyquist filter, i.e. one that has the property of vestigial symmetry. This means that its spectrum exhibits odd symmetry about 
, where T is the symbol-period of the communications system.
Its frequency-domain description is a piecewise function, given by:
![|H(f)| = \begin{cases} 1.0, & |f| \leq \frac{1 - \beta}{2T} \\ \frac{1}{2}\left[1 + \cos\left(\frac{\pi T}{\beta}\left[|f| - \frac{1 - \beta}{2T}\right]\right)\right], & \frac{1 - \beta}{2T} < |f| \leq \frac{1 + \beta}{2T} \\ 0, & \mbox{otherwise} \end{cases}](../../../math/d/1/f/d1fa9c5842bed561f2cf851bda460a0b.png)
and characterised by two values; β, the roll-off factor, and T, the reciprocal of the symbol-rate.
The impulse response of such a filter (assuming linear phase) is given by:
, in terms of the normalized sinc function.
[edit] Roll-off factor
The roll-off factor, β, is a measure of the excess bandwidth of the filter, i.e. the bandwidth occupied beyond the Nyquist bandwidth of . If we denote the excess bandwidth as Δf, then:
where 
is the symbol-rate.
The graph shows the amplitude response as β is varied between 0 and 1, and the corresponding effect on the impulse response. As can be seen, the time-domain ripple level increases as β decreases. This shows that the excess bandwidth of the filter can be reduced, but only at the expense of an elongated impulse response.
[edit] β = 0
As β approaches 0, the roll-off zone becomes infinitesimally narrow, hence:
where rect(.) is the rectangular function, so the impulse response approaches 
. Hence, it converges to an ideal or brick-wall filter in this case.
[edit] β = 1
When β = 1, the non-zero portion of the spectrum is a pure raised cosine, leading to the simplification:
![|H(f)|_{\beta=1} = \left \{ \begin{matrix} \frac{1}{2}\left[1 + \cos\left(\pi fT\right)\right], & |f| \leq \frac{1}{T} \\ 0, & \mbox{otherwise} \end{matrix} \right.](../../../math/2/c/c/2ccb1eb94dc27f4716afb06c265da57f.png)
[edit] Bandwidth
The bandwidth of a raised-cosine filter is most commonly defined as the width of the non-zero portion of its spectrum, i.e.:
[edit] Application
When used to filter a symbol stream, a Nyquist filter has the property of eliminating ISI, as its impulse response is zero at all nT (where n is an integer), except n = 0.
Therefore, if the transmitted waveform is correctly sampled at the receiver, the original symbol values can be recovered completely.
However, in most practical communications systems, a matched filter must be used in the receiver, due to the effects of white noise. This enforces the following constraint:
i.e.:
To satisfy this constraint whilst still providing zero ISI, a root-raised-cosine filter is typically used at each end of the communication system. In this way, the total response of the system is raised-cosine.
Note that the phase response of the receiver filter must be the negative of that of the transmitter filter.
[edit] Phase response
To successfully eliminate ISI, the implementation of the (root-)raised-cosine filter should be phase-linear.
This filter is often implemented as a digital FIR filter, which allows the phase-linearity constraint to be easily achieved.
[edit] References
- Glover, I.; Grant, P. (2004). Digital Communications (2nd ed.). Pearson Education Ltd. ISBN 0-13-089399-4.
- Proakis, J. (1995). Digital Communications (3rd ed.). McGraw-Hill Inc. ISBN 0-07-113814-5.
[edit] External links
- - Technical article entitled 'The care and feeding of digital, pulse-shaping filters' originally published in RF Design.
